Difference between revisions of "Repairing and Defragmenting Windows Server 2008 R2 Disks"

From Techotopia
Jump to: navigation, search
(Automated Disk Defragmentation)
Line 138: Line 138:
  
 
Once invoked, automated disk defragmentation is configured by clicking on the ''Turn on a schedule'' button and selecting the ''Run on a schedule (recommended)'' toggle in the resulting Modify Schedule dialog:
 
Once invoked, automated disk defragmentation is configured by clicking on the ''Turn on a schedule'' button and selecting the ''Run on a schedule (recommended)'' toggle in the resulting Modify Schedule dialog:
 
+
<google>WIN28BOX</google>
  
 
[[Image:windows_server_2008_r2_defrag_schedule.jpg|Configuring a Windows Server 2008 R2 disk defragmentation schedule]]
 
[[Image:windows_server_2008_r2_defrag_schedule.jpg|Configuring a Windows Server 2008 R2 disk defragmentation schedule]]

Revision as of 19:11, 1 April 2011

PreviousTable of ContentsNext
Managing Windows Server 2008 R2 Disk QuotasConfiguring Windows Server 2008 R2 File Sharing


<google>BUY_WINSERV_2008R2</google>

A vital part of maintaining the health and performance of a server system involves ensuring that the disk file systems are in optimal condition. The objective of this chapter of Windows Server 2008 R2 Essentials, therefore, is to cover the subject of checking, repairing and defragmenting FAT, FAT32 and NTFS file systems under Windows Server 2008 R2 using both graphical and command-line tools.


Contents


Using Check Disk to Scan For and Fix File System Errors

The Check Disk tool can be used either to scan for and report errors on a file system, or to locate and fix errors. The graphical form of Check Disk can be invoked either from within Windows Explorer or the Disk Management tool. In either case, invoke the tool by right clicking on the drive in question, selecting Properties, clicking the Tools tab and pressing the Check Now... button.

Once invoked, the initial Check Disk dialog will appear providing two options as illustrated below:


<google>ADSDAQBOX_FLOW</google> The Windows Server 2008 Disk Check Options


If neither of the options are selected when the Start button is pressed Check Disk will only report, but not attempt to fix errors. In order for Check Disk to repair errors and recover bad sectors during the scan the Automatically fix file system errors and Scan for and attempt recovery of bad sectors toggles must be selected respectively.

If the disk drive contains open files, Check Disk will be unable to fix errors located during the scan and will display a dialog warning you of this fact. This warning dialog will also provide the option to have the check run on the next system reboot (before any files are opened). This marks the disk as dirty forcing Check Disk execution at system startup. This setting may also be specified from the command prompt using the fsutil utility as follows:

 
fsutil dirty set e:
Volume - e: is now marked dirty

The current setting for a volume may be checked at any time using fsutil dirty query:

fsutil dirty query
Volume - e: is Dirty

Running Check Disk from the Command-prompt

The Check Disk process may also be initiated from the command prompt using the chkdsk command combined with the designator of the drive on which the scan is to be performed. In addition to performing the same functions as the graphical version of Check Disk, the command prompt version also provides more detailed disk analysis and repair reports.

The chkdsk utility accepts a number of command line options which govern the tasks performed during execution. These options are outlined in the following table:

Option Description
/F Analyze the disk and fix any errors detected.
/B Reevaluate clusters marked as bad on the volume.
/C Do not check for cycles (a situation where a directory points to itself) within the folder structure. NTFS only.
/I Perform a minimum check of indexes. NTFS only
/L[:Size] Change the size of the transaction log file efault size is m default of 4096 KB. NTFS only.
/R Analyze the disk and fix any errors, check for bad sectors and mark them as bad.
/V List the full path of every file on the volume on FAT/FAT32. Displays messages related to fixing errors on NTFS volumes.
/X Force the volume to dismount if currently mounted.

To perform a disk analysis without correcting any errors, simply enter chkdsk at a command prompt together with the drive designator of the drive to be analyzed the following output is the result of running chkdsk on an NTFS volume:

C:\Windows\system32>chkdsk e:
The type of the file system is NTFS.
Volume label is New Volume.

WARNING!  F parameter not specified.
Running CHKDSK in read-only mode.

CHKDSK is verifying files (stage 1 of 3)...
  64 file records processed.
File verification completed.
  0 large file records processed.
  0 bad file records processed.
  0 EA records processed.
  0 reparse records processed.
CHKDSK is verifying indexes (stage 2 of 3)...
  90 index entries processed.
Index verification completed.
  0 unindexed files processed.
CHKDSK is verifying security descriptors (stage 3 of 3)...
  64 security descriptors processed.
Security descriptor verification completed.
  13 data files processed.
Windows has checked the file system and found no problems.

   8385535 KB total disk space.
    328864 KB in 9 files.
        16 KB in 15 indexes.
         0 KB in bad sectors.
     44715 KB in use by the system.
     43984 KB occupied by the log file.
   8011940 KB available on disk.

      4096 bytes in each allocation unit.
   2096383 total allocation units on disk.
   2002985 allocation units available on disk.

To perform error fixing, run chkdsk with the /F option. Alternatively the /R option will perform the same error fixing as /F but will also check for bad sectors. The /X option performs the same error corrections as /F but also dismounts the volume before doing so.


Defragmenting Disks with Disk Defragmenter

Disk fragmentation occurs over time as files written to clusters spread over a wide area of a disk volume. This is the inevitable side effect of files being created and deleted over time and can ultimately result in degraded disk read/write performance.

As such it is considered good practice to regularly monitor, and when necessary, defragment disk volumes.

One method for performing this task is to use the Disk Defragmenter tool which is accessed by right clicking on a disk volume in Windows Explorer or the Disk Management interface in Computer Management and selecting Properties. In the properties dialog, select the Tools tab and click on Defragment Now.... This will display the initial screen of the Disk Defragmenter as illustrated in the following figure:


The Windows Server 2008 R2 Disk Defragmentation Tool


The tool will perform a scan of the selected volume and report whether a defragmentation is recommended (and in the above example it is recommended). Click on Defragment now... to initiate the defragmentation process. This will cause the drive selection dialog to appear. Select one or more disks to defragment from this dialog followed by OK to trigger the defragmentation process. As each selected drive is defragmented the progress will be displayed together with a button providing the option to cancel the process.

Automated Disk Defragmentation

Windows Server 2008 R2 also provides the option to automatically defragment disk drives as a background task. This is scheduled in the Disk Defragmenter tool which can be accessed either from within Windows Explorer or Disk Management as outlined above.

Once invoked, automated disk defragmentation is configured by clicking on the Turn on a schedule button and selecting the Run on a schedule (recommended) toggle in the resulting Modify Schedule dialog: <google>WIN28BOX</google>

Configuring a Windows Server 2008 R2 disk defragmentation schedule


By default, automated defragmentation occurs at 1am every Wednesday. This schedule may be changed simply by modifying the settings accordingly and clicking the OK button.

To specify the volumes to be automatically defragmented, click on Select disks... and make the required volume selections.

To verify if a disk needs to be defragmented, select the desired disk from the list and click on the Analyze Disk button located on the main Disk Defragmenter screen. The analysis will then report the level of fragmentation as a percentage. If the analysis reports a high percentage, click the Defragment disk button to begin the process. The duration of the defragmentation will depend on the size of the disk and level of defragmentation.

Defragmenting Disks from the Command-line

Disk defragmentation may be analyzed and repaired from the command-prompt using the defrag command. This command supports a number of command-line options as described in the following table:

Option Description
-A Perform an analysis of the specified volume.
-C Defragment all disks.
-F Force defragmentation of a volume even when low on space.
-R Perform a partial defragmentation, consolidating fragments smaller than 64 MB (default).
-V Set verbose mode for detailed output during analysis and/or defragmentation.
-W Performs full defragmentation, consolidating all fragments regardless of fragment size.

To perform an analysis of a volume, simply invoke defrag using the -A option together with the designator of the drive to be analyzed:

C:\Windows\system32>defrag e: -a
Windows Disk Defragmenter
Copyright (c) 2006 Microsoft Corp.

Analysis report for volume E: New Volume

    Volume size                         = 8.00 GB
    Free space                          = 7.93 GB
    Largest free space extent           = 4.00 GB
    Percent file fragmentation          = 0 %

    Note: On NTFS volumes, file fragments larger than 64MB are not included in the fragmentation statistics

    You do not need to defragment this volume.

A more detailed report can be obtained using the -A option in conjunction with -V, for example:

C:\Windows\system32>defrag e: -a -v
Windows Disk Defragmenter
Copyright (c) 2006 Microsoft Corp.

Analysis report for volume E: New Volume

    Volume size                         = 8.00 GB
    Cluster size                        = 4 KB
    Used space                          = 65 MB
    Free space                          = 7.93 GB
    Percent free space                  = 99 %

File fragmentation
    Percent file fragmentation          = 0 %
    Total movable files                 = 14
    Average file size                   = 4 MB
    Total fragmented files              = 1
    Total excess fragments              = 1
    Average fragments per file          = 1.12
    Total unmovable files               = 4

Free space fragmentation
    Free space                          = 7.93 GB
    Total free space extent             = 4
    Average free space per extent       = 1.98 GB
    Largest free space extent           = 4.00 GB

Folder fragmentation
    Total folders                       = 7
    Fragmented folders                  = 1
    Excess folder fragments             = 0

Master File Table (MFT) fragmentation
    Total MFT size                      = 64 KB
    MFT record count                    = 34
    Percent MFT in use                  = 53
    Total MFT fragments                 = 2

    Note: On NTFS volumes, file fragments larger than 64MB are not included in the fragmentation statistics

    You do not need to defragment this volume.

<google>BUY_WINSERV_2008R2_BOTTOM</google>