Difference between revisions of "Sharing Fedora Linux Folders with Remote Windows Systems"

From Techotopia
Jump to: navigation, search
(Sharing Fedora Linux Folders)
Line 101: Line 101:
 
Click on ''OK'' when you have configured the information in this dialog. The main dialog should appear with the new share listed:
 
Click on ''OK'' when you have configured the information in this dialog. The main dialog should appear with the new share listed:
  
 +
 +
<google>ADSDAQBOX_FLOW</google>
 
[[Image:fedora_new_share.jpg]]
 
[[Image:fedora_new_share.jpg]]
  
 
Once completed, the folder you specified will be visible from any Windows systems on the same network (and workgroup specified in the Server Settings page) as your Fedora Linux system. You should now have remote access to your Linux folder from the Windows system.
 
Once completed, the folder you specified will be visible from any Windows systems on the same network (and workgroup specified in the Server Settings page) as your Fedora Linux system. You should now have remote access to your Linux folder from the Windows system.

Revision as of 20:18, 18 March 2009

PreviousTable of ContentsNext
Sharing Fedora Linux Folders with Remote Linux and UNIX SystemsConfiguring a Fedora Linux Based Web Server


Although Linux is increasingly making inroads into the desktop market, its origins are very much server oriented. It is not surprising, therefore, that Linux has the ability to act as a file server. Files on a Linux system can be accessed both from other Linux (and UNIX) systems and Windows based systems over network connections.

Remote filesystem access between Linux and UNIX systems is achieved using technology called Network File System (NFS) which is discussed in Sharing Fedora Linux Folders with Remote Linux and UNIX Systems. Windows systems share resources such as filesystems and printers using something called Server Message Block (SMB). In order for a Linux system to serve such resources over a network to a Windows system it must, therefore, support SMB. This is achieved using Linux technology known as Samba.

In this chapter we will look in detail at the steps necessary to share filesystem resources on a Fedora Linux system with remote Windows Systems.


Contents


Installing Samba on a Fedora Linux System

The default settings used during the Fedora Linux installation process do not install Samba. Unless you specifically requested that Samba be installed it is unlikely that you have Samba installed on your system. To check whether Samba is installed, open a terminal window and run the following rpm command:

rpm -q samba

If Samba is installed, the rpm command will generate output similar to the following:

samba-3.0.25b-2.fc7

If Samba is not installed, rpm will return with "package samba is not installed".

If Samba is not installed on your system it can be installed using the yum command-line tool:

su -
yum install samba

The above command will install both the samba package and the samba-common dependency package.

Starting the Samba Service on Fedora Linux

Having installed the Samba service packags the next step is to start those services running. This can be done either from the command line, or from the Service Configuration Tool.

To verify that the Samba service is running from the command-line execute following command from a Terminal window:

/sbin/service smb status

If the service is stopped it can be started as follows (note that this command must be performed with super user privileges:

su -
/sbin/service smb start

Alternatively, to configure the Samba service using the GUI based Service Configuration Tool, select it from the System->Administration->Server Settings->Services menu. When the tool loads, scroll down the list of services to find smb. Check the box next to the service if you want the service to start on reboot, and then click the Start button. Check the status panel to the right of the dialog to verify the service is running (a message similar to "smb (pid 543212 is running..." will be displayed).


Configuring the Fedora Firewall to Enable Samba

Next, the firewall needs to be configured to allow Samba traffic. To achieve this, run the Security Level Configuration tool by selecting the System->Administration->Firewall and SELinux menu option. If the firewall is enabled, make sure that the check box next to NFS4 is set and then click on Apply and Close.

Sharing Fedora Linux Folders

Once the Samba File sharing is installed and running, the next step is to configure the filesystem directories (also known as folders) to be shared with the Windows systems.

The easiest way to achieve this is to use the Samba Server Configuration tool. As with the Samba server packages, it is likely that this tool was not installed by default on your system. To check if it is installed run the following command in a Terminal window:

rpm -q system-config-samba

If the tool is not installed it may be installed as follows:

su - 
yum install system-config-samba

Once installed, the Samba Server Configuration may be launched from the System->Preferences->System->Samba desktop menu option, or from the command-line:

system-config-samba

When loaded, the Samba Server Configuration tool will appear as follows:

Fedora Samba Server Configuration Tool

Select Preferences->Server Settings... and enter the name of the Windows Workgroup to which you wish this server to belong and click OK.

Select Preferences->Samba Users... and select a user from the list which will be used to share folders with the Window's system. After selecting the user, enter the corresponding Windows user name which will be mapped to the Linux user you just specified and provide a password to be used for share access. Click on OK.

Click on the Add button in the toolbar to add a new folder to share. The following dialog will subsequently appear:

Add a new Samba Shared Folder

Type or browse to the path you wish to share and enter a share name if you do not like the one provided by the tool. Set the Writable and Visible toggles to your desired settings and click OK. Select the Access' and either select a user added in the previous step,, or allow access to all users.

Click on OK when you have configured the information in this dialog. The main dialog should appear with the new share listed:


<google>ADSDAQBOX_FLOW</google> Fedora new share.jpg

Once completed, the folder you specified will be visible from any Windows systems on the same network (and workgroup specified in the Server Settings page) as your Fedora Linux system. You should now have remote access to your Linux folder from the Windows system.