Difference between revisions of "Mirroring Windows Server 2008 GBT and MBR Boot and System Disks"
(→Mirroring Boot and System Volumes on an MBR Disk using Disk Management)
m (Mirroring Windows Server 2008 System Disks moved to Mirroring Windows Server 2008 GBT and MBR Boot and System Disks)
Revision as of 18:23, 23 July 2008
The focus of this chapter is the mirroring of boot and system disks on Windows Server 2008. It is important to note that the steps necessary for mirroing system disks differs depending on whether the disk uses the MBR or GPT partitioning style. As such, this chapter will cover the steps necessary to mirror both types of Windows Server 2008 system disk.
An Overview of GPT and MBR Partition Styles
Before a Windows Server 2008 system disk can be mirrored it is important to identify the partition style used by the disk as this will dictate the technique used to create the mirror. In order for a disk to be used to store data it must first have partitions created on it. These partitions are then formated with a particular file system (FAT, FAT32, NTFS) and used either as a basic disk or as dynamic disk. Obviously, the operating system needs some mechanism for organizing and managing these disk partitions and Windows Server 2008 provides two such partitioning styles known as Master Boot Record (MBR) or GUID Partition Table (GPT).
The MBR style was originally developed for x86-based computer systems and is by far the most common style in use at present. GPT, on the other hand, was originally developed for 64-bit Itanium based systems. With the arrival of Windows Server 2008 both x86 32-bit and 64-bit systems support MBR and GPT partition styles. It is important to note, however, that 32-bit systems can only boots from MBR disk partitions and 64-bit systems can only boot from GPT partitions.
Each partition style has different capabilities and partitioning styles. Of most significance is the fact that the two partition styles have very different configurations in terms of special mandatory partitions required in order to store data. In addition, other mandatory partitions are required on each disk style in order to operate as boot and system disks. In terms of MBR disks a master boot record (MBR) partition is required. On GPT disks, EFI system (ESP) and Microsoft Reserved (MSR) partitions must be present in order for the disk to be bootable. It is important, therefore, that these partitions are created as part of the system disk mirroring configuration process.
Mirroring Boot and System Volumes on an MBR Disk using Disk Management
The process of mirroring boot and system volumes on Windows Server 2008 MBR disks is considerably more straight forward than on GPT disks. For the purposes of this chapter we will be working with a system containing 2 disk drives. Disk 0 is the system disk and disk 1 is an unallocated disk installed for the purpose of mirroring the system disk. This process can be performed using either the Disk Management interface or from the command prompt using the diskpart tool (covered in the next section). The Disk Management interface can be accessed either from the Server Manager or Computer Management tools. To launch the Server Manager, open the Start menu and click on the Server Manager option, or click on the Server Manager icon in the task bar. Alternatively launch Computer Management from Start -> All Programs -> Administration Tools -> Computer Management or run compmgmt.csc at the command prompt or in a Run dialog.
Before the system disk can be mirrored it must first be converted to a dynamic disk. To achieve this right click on the system drive in the Disk Management graphical view, select Convert to Dynamic Disk... from the popup menu and follow the instructions in the resulting dialog to perform the conversion.
With the system disk now a dynamic disk, all that needs to be done now is to add the new disk as a mirror of the system disk. To achieve this right click on the system volume in the Disk Management graphical view and select Add Mirror... from the popup menu. The resulting Add Mirror dialog will list the disk drive available on the system. Select the desired disk (in this case disk 1) as shown below:
With a suitable mirror disk selected, click on Add Mirror to begin the resynching process. During this phase the operating system will copy all the files from the original system volume (including System, Boot, PageFile and Crash Dump) to the mirror disk. It will also create the master boot record (MBR). Finally, Windows will add the mirror as a secondary boot option in the Boot Manager such that it can be selected when the system is rebooted. During the reboot process the boot menu will appear listing the shadow system partition as secondary plex:
Mirroring Boot and System Volumes on an MBR Disk from the Command Prompt
Mirroring Boot and System Volumes on a GPT Disk
The process to mirror a GPT based system disk on Windows Server 2008 is a slightly more complex process since the EFI and MSR partitions must be created manually on the mirror disk. For the purposes of this tutorial we will be working with a system containing a GPT system disk and a new disk numbered as disks 0 and 1 respectively. The objective will be to mirror the GTP system disk on disk 1.
The mirroring process will be performed from the command prompt using the diskpart tool which can be launched by opening a command prompt and typing diskpart. Once started, diskpart will present the DISKPART> prompt where commands may be entered.
The first step is to list the disks on the system using the list disk command:
In the above output, disk 0 is the system disk and disk 1 is the new disk which will be used as the mirror. Before disk 1 can be used, any existing partitions on that disk must be removed. To identify any current partitions, select this disk and list partitions as follows:
Clearly, this disk already contains a partition. If this data is required, be sure to back it up before removing any partitions. Once the backup is complete, select and delete any partitions as follows:
DISKPART> delete partition override
Once any partitions are deleted the next step is to gather information about the partitions contained on the current system disk. To do so select the system disk and list the partitions:
DISKPART> select disk 0 DISKPART> list partition Partition ### Type Size Offset ------------- ---------------- ------- ------- Partition 1 System 304 MB 32 KB Partition 2 Primary 12996 MB 304 MB Partition 3 Reserved 32 MB 13 GB
In the above output, Partitions 1 and 3 are the EFI and MSR partitions respectively. In order to accurately mirror the system disk these partitions also need to created on the mirror disk using the create partition command
DISKPART> select disk 1 Disk 1 is now the selected disk. DISKPART> create partition efi size=204 Diskpart succeeded in creating the specified partition. DISKPART> create partition msr size=32 Diskpart succeeded in creating the specified partition. DISKPART> list partition Partition ### Type Size Offset ------------- ---------------- ------- ------- Partition 1 System 304 MB 17 KB *Partition 2 Reserved 32 MB 304 MB
Having created the EFI and MSR partitions the EFI partition must be formated with a FAT file system and populated with the files from the EFI partition on the primary system disk. Before this can be achieved, the partitions need to be assigned drive letters:
DISKPART> select disk 1 Disk 1 is now the selected disk. DISKPART> select partition 1 Partition 1 is now the selected partition. DISKPART> Assign letter=H DISKPART> select disk 0 Disk 1 is now the selected disk. DISKPART> select partition 1 Partition 1 is now the selected partition. DISKPART> Assign letter=I
Once a drive letter have been assigned, open a second command prompt window, format the partition:
C:>format h: /fs:fat /q /y C:>xcopy i:\*.* h: /s /h
With the disk populated with the mandatory partitions, both the disks must be converted to dynamic disks using the convert command:
DISKPART> select disk 1 Disk 1 is now the selected disk DISKPART> convert dynamic Diskpart successfully converted the selected disk to Dynamic format. DISKPART> select disk 0 Disk 0 is now the selected disk DISKPART> convert dynamic You must reboot your computer to complete this operation. DISKPART> exit
After exiting from diskpart it will be necessary to reboot the system (possibly twice) for the conversion of the system disk to take effect. Once the disks are converted to dynamic disks the final stage in the process is to add disk 1 as the mirror for the system disk. Once again start up diskpart and execute the following commands:
DISKPART> select disk 0 DISKPART> add disk=1