Displaying CentOS Stream 9 Applications Remotely (X11 Forwarding)

In the previous chapter, we looked at how to display the entire CentOS Stream 9 desktop on a remote computer. While this works well if you need to display the entire desktop remotely, it could be considered overkill if you only want to display a single application. Therefore, this chapter will look at displaying individual applications on a remote system.

Requirements for Remotely Displaying CentOS Stream 9 Applications

There are some prerequisites to running an application on one CentOS 9 system and displaying it on another. First, the system on which the application is to be displayed must be running an X server. If the system is a Linux or UNIX-based system with a desktop environment running, then this is no problem. However, if the system is running Windows or macOS, you must install an X server before displaying applications from a remote system. Several commercial and free Windows-based X servers are available for this purpose, and a web search should provide you with a list of options.

Second, the system on which the application is being run (as opposed to the system on which the application is to be displayed) must be configured to allow SSH access. Details on configuring SSH on a CentOS 9 system can be found in the chapter “Configuring SSH Key-based Authentication on Rocky Linux 9CentOS Stream 9”. Finally, this system must also run the X Window System from X.org instead of Wayland. To enable the X.org system, edit the /etc/gdm/custom.conf file and uncomment the WaylandEnable line as follows and restart the system:

# Uncomment the line below to force the login screen to use Xorg
WaylandEnable=falseCode language: plaintext (plaintext)

Finally, SSH must be configured to allow X11 forwarding. This is achieved by adding the following directive to the SSH configuration on the system from which forwarding is to occur. By default on CentOS 9, the /etc/sshd_config file contains a directive to include all of the configuration files contained in the /etc/ssh/sshd_config.d directory:

Include /etc/ssh/sshd_config.d/*.confCode language: plaintext (plaintext)

A file named 50-redhat.conf will have been created on a newly installed system in the /etc/ssh/sshd_ config.d folder. Edit this file and ensure that the X11Forwarding property is enabled as follows:

 

You are reading a sample chapter from CentOS Stream 9 Essentials. Buy the full book now in eBook or Print format.

Full book includes 34 chapters and 290 pages. Learn more.

Preview  Buy eBook Buy Print

 

X11Forwarding yesCode language: plaintext (plaintext)

After making the change, save the file and restart the SSH service:

# systemctl restart sshdCode language: plaintext (plaintext)

Once the above requirements are met, it should be possible to display an X-based desktop application remotely.

Displaying a CentOS 9 Application Remotely

The first step in remotely displaying an application is to move to the system where the application is to be displayed. At this system, establish an SSH connection to the remote system so that you have a command prompt. This can be achieved using the ssh command. When using the ssh command, we need to use the -X flag to tell it that we plan to tunnel X11 traffic through the connection:

$ ssh -X user@hostnameCode language: plaintext (plaintext)

In the above example, user is the user name to use to log into the remote system, and hostname is the hostname or IP address of the remote system. Enter your password at the login prompt and, once logged in, run the following command to see the DISPLAY setting:

$ echo $DISPLAYCode language: plaintext (plaintext)

The command should output something similar to the following:

 

You are reading a sample chapter from CentOS Stream 9 Essentials. Buy the full book now in eBook or Print format.

Full book includes 34 chapters and 290 pages. Learn more.

Preview  Buy eBook Buy Print

 

localhost:10.0Code language: plaintext (plaintext)

To display an application, run it from the command prompt. For example:

$ geditCode language: plaintext (plaintext)

When executed, the above command should run the gedit tool on the remote system but display the user interface on the local system.

Trusted X11 Forwarding

If the /etc/ssh/sshd_config.d/50-redhat.conf file on the remote system contains the following line, then it is possible to use trusted X11 forwarding:

ForwardX11Trusted yesCode language: plaintext (plaintext)

Trusted X11 forwarding is slightly faster than untrusted forwarding but is less secure since it does not engage the X11 security controls. The -Y flag is needed when using trusted X11 forwarding:

$ ssh -Y user@hostnameCode language: plaintext (plaintext)

Compressed X11 Forwarding

When using slower connections, the X11 data can be compressed using the ssh -C flag to improve performance:

 

You are reading a sample chapter from CentOS Stream 9 Essentials. Buy the full book now in eBook or Print format.

Full book includes 34 chapters and 290 pages. Learn more.

Preview  Buy eBook Buy Print

 

$ ssh -X -C user@hostnameCode language: plaintext (plaintext)

Displaying Remote CentOS 9 Apps on Windows

To display CentOS 9-based apps on Windows, an SSH client and an X server must be installed on the Windows system. Installing and using the PuTTY client on Windows was covered earlier in the book in the Configuring SSH Key-based Authentication on CentOS Stream 9 chapter. Refer to this chapter if you have not already installed PuTTY on your Windows system.

In terms of the X server, several options are available, though a popular choice appears to be VcXsrv which is available for free from the following URL:

https://sourceforge.net/projects/vcxsrv/

Once the VcXsrv X server has been installed, an application named XLaunch will appear on the desktop and in the start menu. Start XLaunch and select a display option (the most flexible being the Multiple windows option which allows each client app to appear in its own window):

Figure 17-1

Click the Next button to proceed through the remaining screens, accepting the default configuration settings. On the final screen, click the Finish button to start the X server. If the Windows Defender dialog appears, click the button to allow access to your chosen networks.

 

You are reading a sample chapter from CentOS Stream 9 Essentials. Buy the full book now in eBook or Print format.

Full book includes 34 chapters and 290 pages. Learn more.

Preview  Buy eBook Buy Print

 

Once running, XLaunch will appear in the taskbar and can be exited by right-clicking on the icon and selecting the Exit… menu option:

Figure 17-2

With the X server installed and running, launch PuTTY and either enter the connection information for the remote host or load a previously saved session profile. Before establishing the connection, however, X11 forwarding needs to be enabled. Therefore, within the PuTTY main window, scroll down the options in the left-hand panel, unfold the SSH section, and select the X11 option, as shown in Figure 17-3:

Figure 17-3

Turn on the Enable X11 forwarding checkbox highlighted in Figure 17-4, return to the sessions screen, and open the connection (saving the session beforehand if you plan to use it again):

Figure 17-4

Log into the CentOS 9 system within the PuTTY session window and run a desktop app. After a short delay, the app will appear on the Windows desktop in its own window. Any dialogs the app opens will also appear in separate windows, just as they would on the CentOS 9 GNOME desktop. Figure 17-5, for example, shows the CentOS 9 nm-connection-editor tool displayed on a Windows 11 system:

Figure 17-5

Summary

For situations where remote access to individual CentOS 9 desktop applications is required as opposed to the entire GNOME desktop, X11 forwarding provides a lightweight solution to remotely displaying graphical applications. The system on which the applications are to appear must be running an X Window System-based desktop environment (such as GNOME) or have an X server installed and running. Once X11 forwarding has been enabled on the remote server and a secure SSH connection established from the local system using the X11 forwarding option, most applications can be displayed remotely on the local X server.

 

You are reading a sample chapter from CentOS Stream 9 Essentials. Buy the full book now in eBook or Print format.

Full book includes 34 chapters and 290 pages. Learn more.

Preview  Buy eBook Buy Print

 


Categories