Adding a New Disk to an RHEL 5 Volume Group and Logical Volume

Follow Techotopia on Twitter Bookmark and Share

From Techotopia

Jump to: navigation, search
PreviousTable of ContentsNext
Adding a New Disk Drive to an RHEL 5 SystemAdding and Managing RHEL 5 Swap Space


Purchase and download the full PDF and ePub versions of this RHEL 5 eBook for only $9.99
PDF/ePub edition contains 40 chapters and over 250 pages.
RHEL 6 Edition of this ebook now also available for purchase. Learn more.

Add to Cart


In the previous chapter we looked at adding a new disk drive to a Red Hat Enterprise Linux 5 system, creating a partition and file system and then mounting that file system so that the disk can be accessed. An alternative to creating fixed partitions and file systems is to use Logical Volume Management (LVM) to create logical disks made of space from one or more physical disks or partitions. The advantage of using LVM is that space can be added to or removed from logical volumes as needed without the need to spread data over multiple file systems.

Let us take, for example, the root (/) file system of an RHEL 5 server. Without LVM this file system would be created with a certain size when the operating is installed. If a new disk drive is installed there is no way to allocate any of that space to the / file system. The only option would be to create new file systems on the new disk and mount them at particular mount points. In this scenario you would have plenty of space on the new file system but the / file system would still be nearly full. The only option would be to move files onto the new file system. With LVM, the new disk (or part thereof) can be assigned to the logical volume containing the root file system thereby extending the space available.

In this chapter we will look at the steps necessary to add new disk space to both a volume group and a logical volume for the purpose of adding additional space to the root file system of an RHEL 5 system.

Contents



[edit] An Overview of Logical Volume Management (LVM)

LVM provides a flexible and high level approach to managing disk space. Instead of each disk drive being split into partitions of fixed sizes onto which fixed size file systems are created, LVM provides a way to group together disk space into logical volumes which can be easily resized and moved. In addition LVM allows administrators to carefully control disk space assigned to different groups of users by allocating distinct volume groups or logical volumes to those users. When the space initially allocated to the volume is exhausted the administrator can simply add more space without having to move the user files to a different file system. LVM consists of the following components:

[edit] Volume Group (VG)

The Volume Group is the high level container which holds one or more logical volumes and physical volumes.

[edit] Physical Volume (PV)

A physical volume represents a storage device such as a disk drive or other storage media.

[edit] Logical Volume (LV)

A logical volume is the equivalent to a disk partition and, as with a disk partition, can contain a file system.

[edit] Physical Extent (PE)

Each physical volume (PV) is divided into equal size blocks known as physical extents.

[edit] Logical Extent (LE)

Each logical volume (LV) is divided into equal size blocks called logical extents.

Let's suppose we are creating a new volume group called VolGroup001. This volume group needs physical disk space in order to function so we allocate three disk partitions /dev/sda1, /dev/sdb1 and /dev/sdb2. These become physical volumes in VolGroup001. We would then create a logical volume called LogVol001 within the volume group made up of the three physical volumes. If we run out of space in LogVol001 we simply add more disk partitions as physical volumes and assign them to the volume group and logical volume.

[edit] Getting Information about Logical Volumes

As an example of using LVM with RHEL we will work through an example of adding space to the / filesystem of a standard RHEL installation. Anticipating the need for flexibility in the sizing of the root partition, RHEL sets up the / file system as a logical volume (called LogVol00) within a volume group named VolGroup00. Before making any changes to the LVM setup it is important to gather information.

Running the mount command on an RHEL system will typically show output similar to the following:

# mount
/dev/mapper/VolGroup00-LogVol00 on / type ext3 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
/dev/sda1 on /boot type ext3 (rw)
tmpfs on /dev/shm type tmpfs (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
nfsd on /proc/fs/nfsd type nfsd (rw)

Information about the volume group can be obtained using the /usr/sbin/vgdisplay command:

    --- Volume group ---
  VG Name               VolGroup00
  System ID
  Format                lvm2
  Metadata Areas        1
  Metadata Sequence No  3
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                2
  Open LV               2
  Max PV                0
  Cur PV                1
  Act PV                1
  VG Size               31.88 GB
  PE Size               32.00 MB
  Total PE              1020
  Alloc PE / Size       1020 / 31.88 GB
  Free  PE / Size       0 / 0
  VG UUID               HA8FrD-w14T-5a31-Shn3-ZTAE-9PJH-kFrfF8

As we can see the in the above example, VolGroup00 has a physical extend size of 32MB and has a total of 31.88GB available for allocation to logical volumes. Currently there are no free physical extents so if we want to increase the space allocated to any logical volumes in VolGroup00 we will need to add one or more physical volumes.

The same information can be viewed graphically using the Logical Volume Manager tool, accessed by selecting the System -> Administration -> Logical Volume Management menu option. If the menu option is not available the tool may installed from a terminal window by entering the following commands:

su –
yum install system-config-lvm 

Once installed and running, the tool will appear as follows:


The RHEL LVM tool


Information about logical volumes in a volume group may similarly be obtained using the lvdisplay command:

# lvdisplay
  --- Logical volume ---
  LV Name                /dev/VolGroup00/LogVol00
  VG Name                VolGroup00
  LV UUID                8enNJV-bWkm-Zlf3-rLno-YZvY-awdj-YqFbor
  LV Write Access        read/write
  LV Status              available
  # open                 1
  LV Size                29.91 GB
  Current LE             957
  Segments               1
  Allocation             inherit
  Read ahead sectors     auto
  - currently set to     256
  Block device           253:0

  --- Logical volume ---
  LV Name                /dev/VolGroup00/LogVol01
  VG Name                VolGroup00
  LV UUID                AM1D10-cu8L-KdRk-lWXN-ZLwz-tQow-iv87eS
  LV Write Access        read/write
  LV Status              available
  # open                 1
  LV Size                1.97 GB
  Current LE             63
  Segments               1
  Allocation             inherit
  Read ahead sectors     auto
  - currently set to     256
  Block device           253:1

As shown in the above example 29.91GB of the space in volume group VolGroup00 is allocated to logical volume LogVol00 (for the / file system) and 1.97GB to LogVol01 (for swap space).

Now that we know what space is being used it is often helpful to understand which devices are providing the space (in other words which devices are being used as physical volumes). To obtain this information we need to run the pvdisplay command:

# pvdisplay
  --- Physical volume ---
  PV Name               /dev/sda2
  VG Name               VolGroup00
  PV Size               31.90 GB / not usable 23.41 MB
  Allocatable           yes (but full)
  PE Size (KByte)       32768
  Total PE              1020
  Free PE               0
  Allocated PE          1020
  PV UUID               IDAxKn-Xejs-Q07y-qKOA-T4tz-gCSD-GZjXbK

Clearly the space controlled by logical volume VolGroup00 is provided via a physical volume located on /dev/sda2. Selecting the Physical View from the graphical tool results in the following representation of the same information:


RHEL Physcial Volume view on LVM tool


Now that we know a little more about our LVM configuration we can embark on the process of adding space to the volume group and the logical volume contained within.

[edit] Adding Additional Space to an RHEL Volume Group from the Command Line

Just as with the previous steps to gather information about the current Logical Volume Management configuration of a RHEL system, changing this configuration can be performed both from the command line and from within the graphical volume management tool. In this section we will focus on the use of command line tools since this gives a better understanding of the underlying changes that are being made, and avoids reliance on graphical tools that may not always be available.

In the remainder of this chapter we will assume that a new disk has been added to the system and that it is being seen by the operating system as /dev/sdb. We shall also assume that this is a new disk that does not contain any existing partitions. If existing partitions are present they should be backed up and then the partitions deleted from the disk using the fdisk utility.

The first step is to convert this disk into a physical volume. This is achieved using the pvcreate command:

# pvcreate /dev/sdb
  Physical volume "/dev/sdb" successfully created

With the physical volume created we now need to add it to the volume group (in this case VolGroup00) using the vgextend command:

vgextend VolGroup00 /dev/sdb
  Volume group "VolGroup00" successfully extended

The new physical volume has now been added to the volume group and is ready to be allocated to a logical volume. To do this we run the lvextend tool providing the size by which we wish to extend the volume. To find out the space available on the new physical volumes, we turn again to the pvdisplay command:

# pvdisplay /dev/sdb
  --- Physical volume ---
  PV Name               /dev/sdb
  VG Name               VolGroup00
  PV Size               32.00 GB / not usable 32.00 MB
  Allocatable           yes
  PE Size (KByte)       32768
  Total PE              1023
  Free PE               1023
  Allocated PE          0
  PV UUID               WuW0eO-uezo-JSGF-CUHQ-bxRR-qDBl-jdpdTj

The above output indicate that the new physical volume on /dev/sdb is 32GB in size. In this case we want to extend the size of LogVol00 the full 32GB, though since there are only 1023 physical extents available (1024 would be required for the full 32GB) we will instead allocate 31GB. Note that we need to provide the path to the logical volume which can be obtained from the lvdisplay command (in this case /dev/VolGroup00/LogVol00):

# lvextend -L+31G /dev/VolGroup00/LogVol00
  Extending logical volume LogVol00 to 60.91 GB
  Logical volume LogVol00 successfully resized

The last step in the process is to resize the file system residing on the logical volume so that it uses the additional space. Since we are assuming a default RHEL installation here this can be achieved using the resize2fs command:

# resize2fs /dev/VolGroup00/LogVol00
resize2fs 1.39 (29-May-2006)
Filesystem at /dev/VolGroup00/LogVol00 is mounted on /; on-line resizing required
Performing an on-line resize of /dev/VolGroup00/LogVol00 to 15966208 (4k) blocks.
The filesystem on /dev/VolGroup00/LogVol00 is now 15966208 blocks long.

Once the resize completes the file system will have been extended to use the additional space provided by the new disk drive. All this has been achieved without moving a single file or even having to reboot the system. As far as any users on the system are concerned nothing has changed (except that there is now more disk space). The new space can be verified using the df command. For example:

# df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
                       60G  2.7G   54G   5% /
/dev/sda1              99M   19M   75M  21% /boot
tmpfs                 502M     0  502M   0% /dev/shm

As we can see from the above output, our root (/) partition is now 60GB in size as a result of adding 31GB of disk space from a new disk drive to the logical volume.

Purchase and download the full PDF and ePub versions of this RHEL 5 eBook for only $9.99
PDF/ePub edition contains 40 chapters and over 250 pages.
RHEL 6 Edition of this ebook now also available for purchase. Learn more.

Add to Cart



PreviousTable of ContentsNext
Adding a New Disk Drive to an RHEL 5 SystemAdding and Managing RHEL 5 Swap Space
Views
Personal tools

Find us on Facebook